Entryway light fixtures – Replacing a lamp takes some caution as working with power lines, but taking precautions, you can install the lamp properly without injury. Before you begin, make sure you tell others in the house that will do to the electrical box of the house cannot touch. The installation of a new lamp should take less than an hour to complete, even if it’s the first time I put one on.
Turn off the electricity to the room on the electric panel of the house. Plug a lamp into an outlet in the room to make sure the electricity is turned off while working. Remove the screws holding decorative covering of the old lamp on the ceiling and down the roof deck. Remove the screws holding the cross in the electrical box in the ceiling and the old entryway light fixtures down.
12 Photos Gallery of: Install Entryway Light Fixtures Lamp
Install entryway light fixtures Lamp, Place the bar that comes with the new lamp to the electrical box by conduction through screw anchor strap and the screw holes in the electrical box. Wrap the ground wire of light around the grounding screw in the electrical box. Connect the cables of the same color ceiling lamp and light with plastic joints. Screw in the light bulbs and attach tones or glass covers. Turn the electricity to the room again and turn on the light.