How To Install Moravian Star Pendant Light – Installing a Moravian star pendant light can add an elegant modern touch to your home. Three Moravian star pendants light over an island to a single Moravian star pendant light lamp on a reading table and chair in the bedroom, the installation of a Moravian star pendant light is a relatively easy process. Just follow these steps.
Before installing Moravian star pendant light, turn off the power at the source. Use a circuit tester to ensure the power is off before removing an old lamp. Remove any existing luminaries by loosening the accessory and untwisting wires. After you have removed the old appliance, screw the hanger on the ceiling. Connect the cables of the slope of the wires hanging from the ceiling. Match the wires color. Remove 1/2 inch of insulation from wire color of the slope so you can turn them on wires overhead.
12 Photos Gallery of: How To Install Moravian Star Pendant Light
Once you have twisted together matching cables, attach wire nuts to secure them .Push the wires back into the ceiling. Grasp the top of the Moravian star pendant light. Screw connectors on the glass slide after the connectors through the light cable. Install a light bulb. Turn power to ensure the installation was successful.