LED stair lights – Stair lifts are very beneficial for people who have difficulty climbing stairs, effectively allowing them to reach the top or bottom of a flight of stairs by sitting on a seat, which electronically moving up and down the stairwell. Sometimes, if the lighting is not bright enough, it can be difficult to see stair lift. One solution is to create a lighted path along the stairwell using strings of LED lights.
Measure the length of the opening in the floor slab from the bottom all the way to the top along the diagonal. Choose enough strings of LED stair lights to match the measurement. Heat up a hot glue gun for 10 minutes. Squeeze a line of hot glue along the top angle of the opening in the floor slab opposite the stair lift.
12 Photos Gallery of: Guideline to Install LED Stair Lights
Press the strings of LED stair lights on the hot glue line. Make sure the connector at the end of the strings can reach a power outlet. Allow to cool and heat the glue to cure for two minutes. Plug in the strings of LED lights to illuminate the stair lift. For attention, apply the same color of the LED light for a uniform appearance or select strings of different colors of LED lights to create a multi-colored look.