Modern bathroom vanity lights – Bathroom vanity lights may be old-fashioned and intrusive. Replacing bathroom vanity light with track lighting gives you more flexibility with your lighting; you can increase the amount of fixtures over your vanity and change the direction of the light. The track also allows you to change the look of the luminaries by simply changing track lighting.
Turn off the circuit that supplies electricity to the bathroom vanity light. Hold a non-contact voltage tester against the light socket on the vanity light and the light switch on the wall. If you do not turn the correct button, your tester beeping and flashing. Pull vanity light from the wall to access the wires inside the junction box. Loosen the green screw on the modern bathroom vanity lights strap connected to the junction box. Unpack the copper wires from the whole band screw. This frees up the bathroom vanity fixture. Remove the screws that secure the strap to the junction box.
12 Photos Gallery of: Modern Bathroom Vanity Lights with Track Lighting
Wood green, white and black thread from the twist-lock by track lighting mounting plate. Match the white cable from the twist-lock connectors to the white wire from the junction box. Match the black cable from the twist-lock connectors to the black wire from the junction box. Match the green wire from the twist-lock connectors to healthcare copper wire from the junction box. Twist orange line contacts over the end of each wire set. Attach track modern bathroom vanity lights mounting plate to the junction box with the supplied mounting screws.